SEMI AUTO PRECISION BLADE SHARPENER
Will sharpen 1 1/4” or 1 1/2” blades with 3/4”, 7/8” or 1” tooth space
$625
Will sharpen 1 1/4” or 1 1/2” blades with 3/4”, 7/8” or 1” tooth space
$625
TOOTH SET
Accurately checks and sets teeth on your band blades. Includes blade support arms.
Has dial indicator for precise accuracy.
$325
Accurately checks and sets teeth on your band blades. Includes blade support arms.
Has dial indicator for precise accuracy.
$325
POWER RAISE/LOWERING
Allows effortless adjustment of blade cutting height.
12 Volt: $675
120 volt: $725
Allows effortless adjustment of blade cutting height.
12 Volt: $675
120 volt: $725
HAND CRANK FEED
Easy way to move the saw, especially on wider cuts.
Provides added leverage for slow, steady sawing.
$250
Easy way to move the saw, especially on wider cuts.
Provides added leverage for slow, steady sawing.
$250
POWER FEED SYSTEM 12 volt or 120 volt variable speed mill feed system. Adjustable from 0 to 30 feet per minute. $1150 |
|
LOG TURNER
This winch-on-a-post takes the work out of turning larger logs.
Removes easily from floor stand until you need it.
$175
This winch-on-a-post takes the work out of turning larger logs.
Removes easily from floor stand until you need it.
$175
PEAVEY BRAND CANT HOOK
Long handle gives you an inexpensive lever to move the logs.
$90
Long handle gives you an inexpensive lever to move the logs.
$90
BAND SAW BLADES
(10% OFF WHEN YOU BUY 10 OR MORE)
117” x 1 1/4”. . .$18.50 each
138 3/4” x 1 1/4”. . .$21.50 each
147” x 1 1/4”. . .$22.50 each
158” x 1 1/4”. . .$23.50 each
158" x 1 1/2”. . . $26.50 each
(10% OFF WHEN YOU BUY 10 OR MORE)
117” x 1 1/4”. . .$18.50 each
138 3/4” x 1 1/4”. . .$21.50 each
147” x 1 1/4”. . .$22.50 each
158” x 1 1/4”. . .$23.50 each
158" x 1 1/2”. . . $26.50 each
BAND SAW WHEELS
Each wheel includes balanced cast iron wheel, installed rubber belt,
and a separate center bushing for the stated bore size.
16”, 1 7/16” bore, balanced
$170 each
19”, 1 7/16” bore, balanced
$190each
21”, Extra heavy, 1 7/16” bore, balanced
$375 each
26”, Extra heavy, 1 7/16” bore, balanced
$475 each
14” 1 groove driven pulley 1 7/16” bore
$95 each
14” 2 groove driven pulley 1 7/16" bore
$185 each
Each wheel includes balanced cast iron wheel, installed rubber belt,
and a separate center bushing for the stated bore size.
16”, 1 7/16” bore, balanced
$170 each
19”, 1 7/16” bore, balanced
$190each
21”, Extra heavy, 1 7/16” bore, balanced
$375 each
26”, Extra heavy, 1 7/16” bore, balanced
$475 each
14” 1 groove driven pulley 1 7/16” bore
$95 each
14” 2 groove driven pulley 1 7/16" bore
$185 each
SAW GUIDES
Machined from 4140 steel, furnace hardened, with two sealed ball bearings.
Includes 1/2” bolt for mounting.
For 1 1/4” blades
$85 each
For 1 1/2” blades
$90 each
Machined from 4140 steel, furnace hardened, with two sealed ball bearings.
Includes 1/2” bolt for mounting.
For 1 1/4” blades
$85 each
For 1 1/2” blades
$90 each
TRACK ROLLER WHEELS
Machined wheels with two sealed ball bearings.
Has 7/16” groove to run on the edge of 3/8” steel track, such as the 3/8” x 3” x 3” angle iron pictured.
$55 each
Machined wheels with two sealed ball bearings.
Has 7/16” groove to run on the edge of 3/8” steel track, such as the 3/8” x 3” x 3” angle iron pictured.
$55 each
RAISE AND LOWER PACKAGE
Acme threaded 1” rods with machined ends to accept 3/4” bearings. Includes the two acme rods, two machined aluminum bronze nuts with mounting brackets, four 3/4” bearings, hand crank, two sprockets and connecting roller chain.
$450
Acme threaded 1” rods with machined ends to accept 3/4” bearings. Includes the two acme rods, two machined aluminum bronze nuts with mounting brackets, four 3/4” bearings, hand crank, two sprockets and connecting roller chain.
$450
HYDRAULIC BLADE TENSIONER
A self contained hydraulic unit with a center mounted cylinder, for fast and accurate blade tension. Includes hand operated pump, connecting hose, hydraulic cylinder and 3000 psi pressure gauge.
$425
A self contained hydraulic unit with a center mounted cylinder, for fast and accurate blade tension. Includes hand operated pump, connecting hose, hydraulic cylinder and 3000 psi pressure gauge.
$425
MAIN BEARINGS
1 7/16” pillow block bearings.
We position these on each side of the band wheels for maximum stability.
$37 each
1 7/16” pillow block bearings.
We position these on each side of the band wheels for maximum stability.
$37 each
MAIN SHAFTS
Set of two 1 7/16” shafts, on for drive band wheel and the other for the idler.
Drive shaft is keyed.
$70 for set
Set of two 1 7/16” shafts, on for drive band wheel and the other for the idler.
Drive shaft is keyed.
$70 for set
CENTRIFUGAL CLUTCHES
Heavy duty single groove clutch with
4” belt pulley for 1” shafts on engines up to 20 HP
$200
Heavy duty single groove clutch with
4” belt pulley for 1” shafts on engines up to 20 HP
$200
Extra heavy two belt groove clutch
for engines up to 25 HP with 1 1/8” shaft.
$325
for engines up to 25 HP with 1 1/8” shaft.
$325
BLADE GUARD OR BELT COMPONENTS
Unwelded parts for blade or belt guard
14 gauge steel
$75 each
Welded and sanded guard
$140 each
Unwelded parts for blade or belt guard
14 gauge steel
$75 each
Welded and sanded guard
$140 each
SAWMILL ASSEMBLY DVD
Shows the assembly, alignment and testing of our sawmills. Lots of good information if you’re wanting to build your own mill. Most parts shown, measurements are given and helpful hints discussed.
*Refundable with parts order
$35
DETAILED DRAWINGS
Shows most parts with hole placements, component positions and size. Best used in combination with above video.*Model specific.
$50
Shows the assembly, alignment and testing of our sawmills. Lots of good information if you’re wanting to build your own mill. Most parts shown, measurements are given and helpful hints discussed.
*Refundable with parts order
$35
DETAILED DRAWINGS
Shows most parts with hole placements, component positions and size. Best used in combination with above video.*Model specific.
$50
