Name_______________________________________
Address_____________________________________
City______________________State____ ZIP_______
Tel: _______________________ Date _____________ |
LINN LUMBER COMPANY - ORDER SHEET
26380 Fern Ridge Rd.
Sweet Home, OR 97386
Phone: (541) 367-6900
Email: linnlumber@centurytel.net |
| Product Description |
Price |
Total |
| Complete Model 160 Sawmill. Includes saw carriage with water lube, one bolt blade tension, 9 HP Vanguard recoil start engine with centrifugal clutch, 13' of track (saws up to 10') and 5 Lenox bandsaw blades. 20" logs, 16" wheels, 18" throat. |
$4400
|
|
|
Extra 6 1/2' track section. Increases sawing length by 6 1/2'
|
$400
|
|
|
Extra saw blade. 1 1/4" x 117" (10 off for orders of 10 or more)
|
$17
|
|
|
Complete Model 190 Sawmill. Includes saw carriage with hydraulic blade tensioner, water lube, 13 HP Kohler electric start engine with HD clutch, 20' of track (saws 16' 6") and 5 Lenox saw blades. 26" logs, 19" wheels, 22" throat.
|
$5700
|
|
| Honda 13 HP electric start engine. Add.......... |
$150 |
|
| Extra 10' track section Increases sawing length by 10' |
$500 |
|
| Extra saw blade. (10 off for orders of 10 or more) |
$20 |
|
Model 190A: 30" max. log diameter, 15 HP Kohler engine. Uses 1/1/4" x 147" blad blades.
Otherwise same as model 190. |
$6100 |
|
| Vanguard 18 HP engine option for 190A |
$200 |
|
| Complete Model 1900 Sawmill. Includes saw carriage with hydraulic blade tensioner, water lube, 18 HP Briggs Vanguard twin electric start engine with HD clutch, 20' of track (which saws to 16'4") and 5 Lenox 1 1/4" band saw blades. Maximum log diameter: 36", 19" wheels, 30" throat. |
$6900 |
|
| Extra 10' track section. Increases sawing length by 10' |
$500
|
|
| Extra saw blade. 1 1/4" x 158" (10 off for orders of 10 or more) |
$22
|
|
| 21 HP Briggs Vanguard engine option. Add..... |
$200
|
|
| 25 HP Kohler engine option. Add... |
$600
|
|
| Accessories |
Qty. |
Price |
Total |
| Precision sharpener, semi-auto, 120 volt. Use for chain saw too. |
|
$600 |
|
| Tooth set with dial indicator and support arms. For 1" to 2" blade |
|
$300 |
|
| Hand crank feed system for easier sawing. |
|
$200 |
|
| Power raise and lower of saw blade height. |
|
$600 |
|
| Power feed system. choice of 12 volt or 120 volt |
|
$900 |
|
| Demonstration video of the M 190 (Similar to our other mills) |
|
$7 |
|
| Shipping crate. Necessary for shipping if mill is not picked up. |
|
$100 |
|
| Log Turner. Winch on post, with stand. Turns logs easily |
|
$150 |
|
| Peavy brand cant hook |
|
$60 |
|
|
|
Deductions For: |
No Engine |
No Track |
TOTAL |
| Model 160 |
$500 |
$500 |
- $_________ |
| Model 190 |
$800 |
$800 |
- $_________ |
| Model 190-A |
$900 |
$800 |
- $_________ |
| Model 1900 |
$1000 |
$800 |
- $_________ |
| Total Order Due |
$_________
|
| Enclose 10 of total order for Deposit |
$_________ |
| (Balance by cash, card, or cashiers check before shipment Balance Due) |
$_________ |
See our parts page for individual parts and prices. When ordering parts, please phone in your order.
1101A03 Prices and specifications subject to change without notice. All parts and mills are FOB Sweet Home, OR. Shipping is extra
Individual Parts to Build Your Own Sawmill
| Product Description |
Qty. |
Price |
Total |
| Band saw wheels |
|
|
|
| 16" with 1 7/16" bore |
|
$150
|
|
| 19" with 1 7/16" bore |
|
$175 |
|
| 21" extra heavy, balanced with 1 7/16" bore |
|
$300 |
|
| 26" extra heavy, balanced with 1 15/16" bore |
|
$400 |
|
| Saw Guides |
|
|
|
| For 1" blades |
|
$75 |
|
| For 1 1/4" blades |
|
$80 |
|
| For 1 1/2" blades |
|
$85 |
|
| For 2" blades |
|
$90 |
|
| Track roller wheels: Machined wheels with two sealed ball bearings. Has 7/16" wide groove, designed to run on edge of 3/8" steel such as the 3/8" x 3" x 3" angle iron we use for our track rails. |
|
4/$200 |
|
| Raise/lower package: Acme threaded rods with machined end. Includes two 44 1/2", 48 1/2", or 52 1/2" rods, two machines brass nuts, 4 bearings, hand crank, drive sprockets and connection roller chain |
|
$350:190
$375:190A
$400 1900
|
|
| Hydraulic blade tensioner. A self contained hydraulic unit with center mounted cylinder for fast and accurate blade tension. Includes hand pump, connecting hose, hydraulic cylinder and pressure gauge. |
|
$400 |
|
| 1 7/16" pillow block bearings. We put one of these on each side of the big saw wheels to give the mill extra ruggedness and stability. |
|
$30 |
|
| 1 7/16" main drive shafts, one for power side and one for idler side |
|
$45 |
|
| Centrifugal Clutch Heavy duty, ball bearing clutch used for engines from 10 to 20 HP. Fits 1" shaft. Uses "B" section belt and has 4" single groove pulley. Use a "BX" belt for best horse power transfer. |
|
$150 |
|
| Extra Heavy duty Centrifugal Clutch - Engines 20 - 25 HP, Fits 148” shaft, 2 groove pulley. |
|
$295
|
|
|
Basic Sawframe Assembly
|
|
|
|
| Basic Sawframe Assembly: Includes two band saw wheels, 4 bearings, two drive shafts, 1 1/4" saw guides with adjustable mounts, blade tensioning system, driven pulley and one band saw blade. This is the hardest part to build and one of these assemblies will make your construction much easier. Ships UPS All but M-160 have hydraulic blade tensioning. |
|
|
|
| M160 Assembly: 16" wheels, 1 7/16" bearings and shafts, mounted saw guides, one-bolt blade tensioning and one 1 1/4" x 117" blade. |
|
$1000 |
|
| M190 Assembly: 19" wheels, 1 7/16" bearings and shafts, mounted saw guides, hydraulic tensioning and one 1 1/4" x 138 3/4" blade. |
|
$1500 |
|
| M-190-A Assembly: 19" wheels, 26" throat, 1 7/16" bearings and shafts, mounted saw guides, hydraulic tensioning and one 1 1/4" x 147" blade |
|
$1550 |
|
| M-1900 Assembly: 19" wheels, 30" throat, 1 7/16" bearings and shafts, mounted saw guides and one 1 1/4" 158" blade. |
|
$1600 |
|
| M-210 Assembly: 21" wheels, 1 7/16" bearings and shafts, mounted saw guides and one 1 1/4" x 158" blade. |
|
$1900 |
|
|
Super Sawframe Assembly
|
|
|
|
| The Super Sawframe Assembly takes the above basic sawframe and adds to it the two blade guards, the blank engine mounting plate, the drive belt guard and the tubing cross frame necessary to mount this unit to your own rolling carriage. |
|
|
|
| M160 Super Sawframe Assembly: 16" wheels, 1 7/16" bearings and shafts, mounted saw guides, one-bolt blade tensioning, two blade guards, the blank engine mounting plate, the drive belt guard and the tubing cross frame necessary to mount this unit to your own rolling carriage and one 1 1/4" x 117" blade. |
|
$1800 |
|
| M190 Super Sawframe Assembly: 19" wheels, 1 7/16" bearings and shafts, mounted saw guides, hydraulic tensioning, two blade guards, the blank engine mounting plate, the drive belt guard and the tubing cross frame necessary to mount this unit to your own rolling carriage. and one 1 1/4" x 138 3/4" blade. |
|
$2400 |
|
| M-190-A Super Sawframe Assembly: 19" wheels, 26" throat, 1 7/16" bearings and shafts, mounted saw guides, hydraulic tensioning, two blade guards, the blank engine mounting plate, the drive belt guard and the tubing cross frame necessary to mount this unit to your own rolling carriage and one 1 1/4" x 147" blade |
|
$2500 |
|
| M-1900 Super Sawframe Assembly: 19" wheels, 30" throat, 1 7/16" bearings and shafts, mounted saw guides, two blade guards, the blank engine mounting plate, the drive belt guard and the tubing cross frame necessary to mount this unit to your own rolling carriage and one 1 1/4" 158" blade |
|
$2600 |
|
| M-210 Super Sawframe Assembly: 21" wheels, 1 7/16" bearings and shafts, mounted saw guides, two blade guards, the blank engine mounting plate, the drive belt guard and the tubing cross frame necessary to mount this unit to your own rolling carriage and one 1 1/4" x 158" blade |
|
$2900 |
|
Detailed Drawings: Shows sizes and specifications of each part. Useful to determine hole placement and fabrication details. Drawings are model specific.
|
|
$50 |
|
|
Sawmill Assembly Video or DVD- Shows the assembly, alignment and testing of our 190 mill. All parts are shown, measurements are given and helpful hints discussed. Lots of good stuff if you're wanting to guild your own mill. Price refundable with parts order.
|
|
$35 |
|
|
Saw Mill Kits
|
| Saw Mill Kits: Our saw mill kits include everything that you need to build either the Basic Sawframe, the Super Sawframe as described above. The Complete Carriage Kit is the only one of the three that includes everything that you would need for a complete mill (except the power unit with accessories and any of the track/log holders system). To do your part, you must be able to weld, cut, drill, tap, grind and paint. Please note: Specifications for the kits are the same as units already built. |
| |
Basic Sawframe Kit
|
Super Sawframe Kit
|
Complete Carriage Kit
|
|
M-160
|
$700.00
|
$1,150.00
|
$2,300.00
|
|
M-190
|
$1,050.00
|
$1,500.00
|
$2,900.00
|
|
M-190A
|
$1,100.00
|
$1,550.00
|
$3,200.00
|
|
M-1900
|
$1,150.00
|
$1,600.00
|
$3,600.00
|
|
M-210
|
$1,350.00
|
$1,800.00
|
$4,000.00
|
|
